During parts manufacturing, the precision parallel wedges are indispensable standards for dimensional inspection. Mitutoyo offers a wide choice of parallel, square or rectangular wedges, with metric, steel or ceramic dimensions. Class 0: These higher precision wedges are reserved for use in controlled environment by trained inspection personnel. They are used mainly as reference standards for the development of high-precision measuring instruments and for the calibration of lower-class parallel wedges. Class 1: This class is intended for control applications, aiming to verify the accuracy and calibrating buffers and the setting of electronic measuring devices. Class 2: These parallel wedges are intended for use in the workshop for setting and calibrating devices and precision instruments. Class K: The parallel wedges of this class are intended for use in a calibration laboratory or inspection room with temperature control. They shall be used as certified reference standards for the calibration of other parallel wedges.

Sterke punten

Precision: The parallel wedges proposed by Mitutoyo guarantee a high precision. Of course, Mitutoyoa has set up a traceability system for its measurement products, which goes back up to the calibrators of Japanese Metrology Management Centre of the Japanese National Institute of Advanced Sciences and industrial technologies (AIST), and benefits from the status of accredited laboratory by Japanese authorities. Adhesion: Break-in is one of Mitutoyo's specialities. Our advanced technique, developed on more than half-century, allows us to obtain an incomparable surface finish and flatness which contributes with optimum adhesion of the wedges. Abrasion resistance and dimensional stability of steel wedges: the steel used, with high carbon and chromium content, offers the full range of feature requisites for parallel wedges material. Our advanced heat treatment technology, which involves repeated high and low temperature patterns, gives steel calesen an excellent wear resistance associated with high thermal stability over time.

Toepassingen

Parallel wedge in individual steel. A factory control certificate is provided with all Mitutoyo wedges. EN ISO 3650 precision. Delivered: Polystyrene packaging

Technische informatie

Attributen

Nominale afmeting	100 mm

Laten zien UNSPSC / ECL@SS / HS-codes

€ 105,00 ^{excl. BTW}

/ stuk

€ 127,05 ^{incl. BTW}

Levering doorgaans binnen 7-10 dagen